D-G2Q FUEL DISPENSER

D-G2Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage: 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type: Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose 4.5m

Weight : 215kg.

Dimension(L×W×H) : 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

haft. The spring between top cover and distributing valve is used for enforcing sealability. The two gears synchronous to crankshaft moving transmit rotation number into pulse sensor. Working principle This type measurement transducer is similar to a set of hydraulic motor, which is driven by pressured oil. Thus, the discharge is corresponded to the crankshaft rotation. As distributing valve’s position is certain when oil flowing into measurement transducer, the piston discharge or inflow also is constant. Pistons depend upon the different oil pressure of inflow and discharge to move, which form a shuttle movement. The above two pistons movements create a third cylinder, which also has a 120 degree angle. The dynamic working circulation is showed in Diagram 2-25. As the diameter and moving distance of piston is certain, the relation between movement and crankshaft rotation also fixed. In every two times inflo fuel dispenser w or discharge of piston, crankshaft turn around a circle, oil volume in inlet or outlet progress is constant. 1-Piston 2-Crankshaft 3-4-Connecting rod 5-Screw 6-Bearing 7-Bushing 8-Frame 9-Distributing valve 10-Top cover 11-Bearing 12-Spring 13-14-Gear 15-Adjusting bolt 16-T-shaped key 17-Sider cover Diagram 2-24: Structural drawing of four-piston measurement transducer Diagram 2-25: Working principal drawing This type of measurement transducer includes 1L circulation discharge and 0.5 L circulation discharge，selecting according to wanted discharge of fuel dispenser. Discharge adjustment Over a long period of operation the accuracy of measurement transducer declined due to either parts abrasion or large change in oil temperature and viscosity. Therefore, regulative device often used to adjust the accuracy within the stipulated scope of national metrology appraisal. The following procedure is conducted as measurement accuracy decline. (See Diagram 2-26) fuel dispenser Diagram 2-26: Mechanical adjusting device Take out the seal ring on front adjusting bolt; Pull out screw plug; See a regula fuel dispenser

xs:enumeration value=CU　　 xs:annotation　　 xs:documentation Cuba xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=CY　　 xs:annotation　　 xs:documentation Cyprus xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=CZ　　 xs:annotation　　 xs:documentation Czech Republic xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=DK　　 fuel dispenser xs:annotation　　 xs:documentation Denmark xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=DJ　　 xs:annotation　　 xs:documentation Djibouti xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=DM　　 xs:annotation　　 xs:documentation Dominica xs:documentation　　 xs:annotation　　 xs:enumeration　　August 2002 IFSF STANDARD FORECOURT PROTOCOL FP319_1.00　　 EPS POS INTERFACE SPECIFICATION　　 fuel dispenser fuel dispenser

cs� Bionomics argued that economics was hopelessly wedded to the principles of mechanics, and should instead borrow ideas from evolutionary biology. After all, it declared, “a modern market economy is like a tropical rainforest� Such heresy was not new. In the preface to his “Principles of Economics� Alfred Marshall, one of the founders of neoclassical economics, declared that “The Mecca of the economist lies in economic biology� But Mr Krugman showed little mercy. Arguing that his victims knew little about either economics or evolution, he dismissed their work as “biobabble� Undeterred, Eric Beinhocker, of the McKinsey Global Institute, has undertaken his own 500-page haj, entitled “The Origin of Wealth Evolution, Complexity, and the Radical Remaking of Economics� In places (such as its headline call for a “paradigm shift�in economics) the book may irk Mr Krugman and other gatekeepers of the pr fuel dispenser ofession. But it is good enough, and scholarly enough, to warrant their attention rather than their scorn. Indeed, Mr Beinhocker is himself critical of “loose analogising�between biology and economics. The economy, Mr Beinhocker says, is not “like�a rainforest. Rather, economies and ecosystems are both evolutionary systems in their own right. The evolutionary formula—variation, selection and replication—is a formal, “all-purpose�principle, which can perform its magic equally well in either domain. How, then, does the principle go to work on the stuff of economics? The business plan is the economic equivalent of DNA, and the enterprise its host in the world. Mr Beinhocker envisages a Borgesian library of every conceivable plan, from farming wheat in Lebanon in 8500BC to manufacturing “supernano neural-blastule tubes�that have yet to be invented. Evolution provides a remarkably effective way for the economy as a whole to scour this vast library for viable fuel dispenser strategies, finding “needles of good design in haystacks of possibility,�as Dani fuel dispenser