D-GAQ FUEL DISPENSER

D-GAQ FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose:4.5m

Weight :280kg.

Dimension(L×W×H) :900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 45 20ft: 22

enerates 65”~85”W.C. vacuum pressure as operation, reclaiming vapor through reclaim pipe and nozzle, redundant vapor discharging out of exhaust pipe after vacuum pressure cap automatically open. Diagram 4-10: Built-in pump fuel dispenser with vapor recovery function Built-in pump fuel dispenser with vapor recovery function Showed in Diagram 4-10, this kind of fuel dispenser is mounted a vane pump that connected with the parallel pipes of oil delivery and vapor reclaim, in final connect into tank. At the refueling progress, motor drive vane pump operating and reclaim tank vapor through nozzle and coaxial hose. System maintenance Nozzle and delivery pipe used in fuel dispenser with vapor recovery function are coaxial and double layers, simultaneously refueling and reclaiming. Paying much attention to nozzle body and delivery hose, in case of waste, bad operation and crush by vehicle. If system alarm, carefully judge the type of alarm of monitor system whether vacuum degree or exhaust pipe pressure. Adjusting and testing vacuum pump and reclaim nozzle in for situation. Inspect air cap in the latter situation. If breakaway is pull down by accident, reinstall spare pin on upper of valve body. Don’t replace the coaxial and double layers valve with general one. Troubleshooting of vapor recovery equipment Oil spurt from nozzle’s re fuel dispenser claim spout before refueling. Solution methods: Prohibiting force refueling; Wait several seconds to take out nozzle from vehicle tank. Nozzle jump to stop in refueling process Solution methods: Maybe caused by second time operation, it is suggested not to force filing; Wait several seconds to tak fuel dispenser e out nozzle from vehicle tank. Clean waste or deposited oil in air pipe of reclaiming nozzle or inspect O-ring seal. Chapter V Installation & debugging of fuel dispenser The design of fuel dispenser fuel dispenser correlates to the correct operation. Fuel dispenser is designed to install outdoor with underground tank, not allowed to be in indoor so as to endure environmental

unsolicited data array　　 FP_Status_Message .　　FP31_2.22 IFSF - STANDARD FORECOURT PROTOCOL October 2005　　 DISPENSER APPLICATION　　Page: 38　　 TERMINATE_FP The FP is forced to move to the IDLE state.　　 PCD Comment:　　 As most proprietary FP s don t support the concept of terminating a CALLING　　 FP the PCD will have to manage the state transitions from CALLING to IDLE.　　 This action will involve dealing with the proprietary FP being IDLE but having its　　 nozzle removed.　　 Action: The FP receives a Terminate_FP command.　　 Action : The status change is send as an unsolicited data array　　 FP_Status_Message .　　 CLOSE_FP The FP will be closed down and the FP moves into the CLOSED state.　　 PCD Comment:　　 As most proprietary FP s don t support the concept of closing a CALLING FP　　 the PCD will have to manage the state transitions from CALLING to CLOSED.　　 This action will involve dealing with the proprietar fuel dispenser y FP being CLOSED but having　　 its nozzle removed.　　 Action: The FP receives a Close_FP command.　　 Action : The FP state change is send as an unsolicited data array　　 FP_Status_Message .　　 fuel dispenser MAJOR-ERROR If a major error event occurs the FP moves into the INOPERATIVE the.　　 PCD Comment:　　 When the PCD detects a major error with the proprietary FP or fuel dispenser with itself it must　　 change the IFSF FP status to INOPERATIVE.　　 Action :

ngs (inroads on civil rights, Medicare drug-prescription benefits, Hurricane Katrina, to name just a few examples) is widely echoed elsewhere in the United States and can hardly be labelled as mere “pinko�?sentiment. Stanley Lubman Berkeley, California Recounting an election SIR �?It may well be that in Mexico s recent election the “relatively new democratic machinery�? performed well and “election observers found no evidence of serious irregularity�?(“Behind the confusion�? July 8th). But you do not need “serious�?irregularities to overturn a lead of 0.58% and many irregularities have been reported by political parties and the public. For a lot of Mexicans, it seems that the “old�?democratic machinery is working for the new ruling group. While it was impractical to address the allegations during the campaign, it is at least possible to carry out a vote-by-vote recount to clear some of the doubts. Not doing so jeopardises the credibility of the democratic process and the legitimacy of the next president. Lucía Buenrostro London SIR �?So Andrés Manuel López Obrador has “almost no knowledge of, nor apparent interest in, the outside world. He has shown a certain contempt for the rule of law and for...modern democratic institutions, such as the Supreme Court, the independent central bank and the electoral authority�? fuel dispenser (“Change, please�? July 1st). Eerily familiar, and for those very reasons we should not misunderestimate this man. Loren Gatch Norman, Oklahoma Executive non-decision SIR �?May I add another observation to those listed in your article on advising new executives about how best to settle in to thei fuel dispenser r positions (“That tricky first 100 days�? July 15th)? I call it the “died and gone to heaven syndrome�?and it is applicable to those whose new job represents a significant promotion. Once on board, the fuel dispenser new executive spends so much time contemplating his good fortune, that he totally overlooks the fact that he has been hired